Sale!

Ethernet Shield W5500

1,850.00 1,650.00

The Arduino Ethernet Shield W5500 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it’s made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

2 in stock

SKU: 0015 Categories: , , Tags: , , ,

Description

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface).

W5500 suits users in need of stable internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5500 uses a 32Kbytes internal buffer as its data communication memory.

By using W5500, users can implement the Ethernet application they need by using a simple socket program instead of handling a complex Ethernet Controller. It is possible to use 8 independent hardware sockets simultaneously. SPI (Serial Peripheral Interface) is provided for easy integration with the external MCU. The W5500 SPI supports 80 MHz speed and the new efficient SPI protocol, so users can implement high speed network communication. In order to reduce power consumption of the system, W5500 provides WOL (Wake on LAN) and a power down mode.

  • ARM mbed compatible operation
  • Arduino Pin-compatible
  • Ethernet (W5500 Hardwired TCP/IP chip)

W5500 Ethernet shield is designed using the WIZnet W5500 chip.  It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.

Features
  • Support 3.3V / 5V
  • High Speed Ethernet controller W5500 chip
  • SPI interface
  • Internal 32Kbytes Tx/Rx buffer
  • 10/100 Ethernet PHY embedded
  • Support Auto Negotiation (Full / Half duplex, 10 / 100-based)
  • Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • User Selectable GPIO pin
  • Support SD-card slot for storage
  • Support I2C, UART interface
Hardware Configuration
  • RJ-45 with Transformer : Ethernet Port
  • W5500 : a hardwired TCP/IP Ethernet Controller
  • RESET : Reset Ethernet shield and Arduino when pressed
  • SD-Slot : support Micro SD card in FAT16 or FAT32 ; (Please Read the Caution)
  • I2C : I2C interface
  • UART : UART interface

Document

Wiznet 5500 Datasheet

Pin Assignment

Yorbs Electronics - Wiznet 5500 Pinout

Reviews

There are no reviews yet.

Be the first to review “Ethernet Shield W5500”

Your email address will not be published. Required fields are marked *

eighteen + 8 =